Volvo EC210BLC Specs & Technical Data

About the Volvo EC210BLC

The Volvo EC210BLC is a crawler excavator powered by a 5900 cc, 6-cylinder diesel engine producing 145 hp and meeting Euro 3 emission standards, therefore positioning it in the medium-weight excavator segment with an operating weight of 21000 kg. The machine is equipped with a DPF particulate filter and runs on a 24 V electrical system at 50 Hz, since these specifications support reliable operation across a wide range of construction site conditions. Hydraulic assistance and power steering are standard, making the EC210BLC well-suited for demanding digging and earthmoving tasks that require precise control.

The EC210BLC offers a working depth of 6730 mm and a turning radius of 9940 mm, whereas its drive height stands at 2930 mm, ensuring clearance in confined working areas. The bucket capacity of 1.25 m³ and a maximum travel speed of 5.5 km/h reflect a balance between digging productivity and controlled on-site movement. Track width is 600 mm, providing ground contact area proportional to the machine's 22400 kg gross weight.

For transport, the EC210BLC measures 2990 mm in width and 3000 mm in transport height, since these dimensions must be considered when planning low-loader logistics and route permits. The machine features a cabin and is available with either a day cab or sleeper cab configuration, making it adaptable to both short-duration site deployments and extended remote operations. ADR compliance and hydraulics support are also confirmed for this model.

When the EC210BLC Is Not the Right Choice

• The EC210BLC is not suitable for projects requiring emission standards higher than Euro 3, since it does not meet Euro 4, Euro 5, or Stage V requirements that are mandated in low-emission zones.
• Applications demanding a working depth beyond 6730 mm should consider a larger machine, because the EC210BLC's reach is fixed by its boom and arm geometry and cannot be extended beyond this specification.
• Sites with strict width restrictions below 2990 mm present a transport challenge, therefore a narrower-gauge machine would be more appropriate for such logistics constraints.
• For tasks requiring high-cycle productivity with bucket volumes greater than 1.25 m³, a heavier-class excavator would be better suited, whereas the EC210BLC's capacity is optimised for medium-volume earthmoving rather than mass-excavation applications.

Frequently Asked Questions